A high speed high value press with quick make ready, very operator friendly easy to set up with 2 minute colour change. Dry option UV/I.R/HOT AIR.

Options:

• High speed sheeter delivery
• Laminating
• Up to 12 print units
• Hot/Coil Foiling
• Fan Folder Hook Up
• Magnetic Strip Applicator
• Corona Treating
• Chiller Drum Cooling
• Jumbo Unwind/rewind

Our presses are designed and built to last and virtually are maintenance free.

Consisting of SP5, SP6 & SP7.

These machines are special purpose finishing equipment for:

• Coupon/booklet insertion
• Plough folded coupons and booklets
• Die cut to register
• Magnetic strip application
• Piggy back labels
• RFID Insertion
• Laminating and die cutting pre-printed stock
• Laminate to register

With all slitting and finishing capabilities.

Servo Driven - Under assembly

• With Jumbo unwind / Rewind, strobe light, missing label detector or full camera system
• Web width - 450 mm / 18"
• Comes in various models

High speed, servo driven, dual die cutting machine with adjustable anvils, 220T, 24" / 600mm repeats. Web widths available - 500mm / 600mm / 750mm. Complete with quick load reel lifters, precision die cutting for self adhesive, film and packaging materials. Machine is of solid construction complete with optional slitting/stripping tower as well as sheeting options. Inserters if required. More information on request.

The Rotamag MXP 330 – 7 colour with servo technology, high speeds, high production and high performance as well as high quality 2-minute colour change with all options.

Heavy duty, operator friendly, ease of operation as well as outstanding print quality.

• Turn of a switch to remove plate cylinder, which is mounted in precision harden VEE slides. Max circumference of 26" repeat or 208 tooth with micro adjustment.
• Swing away anilox and doctor blade system released by the flick of a switch. Ultra light anilox rollers. The anilox can then be changed in seconds without moving ink tray or plate cylinder.
• 2 minute make ready.
• Ink tray easily removed by turning quick release handle.
• 360 degree forward and backward registration by the push of a button.
• Manufactured widths: 250/340/410/450/52.
• Previous Rotamags are trouble-free, reliable and have had very good acceptance into the marketplace.
• Machines can be completely optioned.

Download Rotamag MXP330’s brochure click here

• High speed slitter rewinder with double die cutting unit  with dual spindles.
• Web widths available are 330mm / 410mm / 600mm.
• Speeds up to 220m per min.
• Quality manufactured product.
• Detachable air shafts, easily removable 25/38/40/76.
• Quick and easy reel change.

Optional:

• Missing label detection.
• Strobe light.
• Advanced vision system.
• Die cutting pre printed stock in register with stripping.

Download Rotamag SRD600’s brochure click here

Special purpose processing machine with versatility and multi functionality with RFID insertion capabilities :

• Booklet feeder with hot melt holding in register to pre-printed stock.
• Piggy back label with over lay lamination and die cutting area provided for ink jet.
• Booklet formation and positioning on pre-printed substraight.
• Patch application e.g. Integrated cards.
• Reel to reel, reel to fold, reel to sheet production.
• Magnetic Stripe Application click here

Download Rotamag SP7’s brochure click here

• Booklet Feed Insertion.
• Hot Melt.
• Piggy Back Label Applying.
• Booklet Formation Ex Plow Folding.
• Finishing Pre-Printed Stock to Register.
• Laminating.
• Sheeting, Rewind and Folding.
• Register Patching.
• Slitting, Die Cutting and Stripping of Pre-Printed Stock.
• Can produce:
  • Booklet Glued in the Laminated and Die Cut to Register.
  • Piggy Back Labels.
  • Theme Park Wrist Bands.
  • Integrated Cards.
  • Security Labels.
  • Registration Labels.
  • Booklet Labels Through Plow Fold.
  • Over Laminating.
  • Inkjet/Numbering with Security Patch.

Download Rotamag Magnetic Stripe’s brochure click here

• Web width: 330mm.
• One (1) only Unwind Unit with counter levered air expanding shaft activated via switch.
• One (1) laminating unwind tower with friction clutch control.
• One (1) self adhesive tape unwind unit with nip roller and waste rewind.
• One (1) variable size, servo driven double die cut unit with eye mark registration.
• One (1) 4000mtr matrix rewind with friction clutch control.
• One (1) slitting unit with three (3) pneumatic holders.
• One (1) wheel away sheeter delivery table with high speed belts.

• Unwind diameter 600mm.
• Speed: 500ft per minute.
• Single detachable rewind shaft sizes.Eg; 25mm/40mm/76mm.
• Unwind/rewind shaft air inflated via switch.
• Scissor slitting / crush slitting with pneumatic holders.
• Web joining table.
• Web guide for alignment of web.
• Electronic brake with soft setting.
• Rewind clutch control via handle.
• Label / length counter.
• Web width: 330mm.
• On the run side lay adjustment on slitting.
• Rewind diameter 300mm.
• End of reel detector.

• Two (2) variable size Flexographic units with reverse doctor blades with motorized fountain rollers.
• Web width: 250mm.
• One (1) only counter levered air expanding unwind shaft.
• One (1) matrix rewind – 4000mtr rewind/air expanding shaft with pneumatic switch.
• One (1) slitting unit with three (3) pneumatic holders supplied with hardened anvil cylinder.
• Two (2) single electronic rewinds, controlled via load cell with tension control.
• Label / length counter with preset auto stop.
• One (1) oversized motor with extra capacity to add up to two (2) additional print units at a later date.

• Web width: 500mm.
• Speed 800ft/200mtrs per minute – stock/job pending.
• To cut from 12” down to 11 2/3” (A4) with slug removal.
• Precision hardened and group upper and lower knives.
• Vacuum rollers for positive holding of sheet.
• Knife mounted on angular contact precision bearings for hi-speed and long life running.
• Shingle conveyor delivery.
• Fixed lower knife.
• Slug removal through trim extractor.

• Unwind unit with counter levered air expanding shaft activated via switch.
• Four (4) flexographic units with easily removed anilox.
• Web width: 250mm.
• One (1) slitting unit and two (2) pneumatic holders.
• One (1) single rewind, reversable for over and under winding.
• Double die cut unit.
• Control console with label counter, length counter, auto stop and full operation controls.

• Web Width: 500mm – sprocket feed.
• One (1) 40” Rotamax Jumbo Unwind Unit.
• Three (3) transport modules fitted with tractor and nip wheels.
• One (1) vaccum cylinder unit for applying variable position patches.
• One (1) die cutting unit, variable size.
• Harmonic registration controlled via handle, nip and tractor drive roller.
• One (1) only Rewind Unit, 3”Ø core.
• One (1) only Variable Size Folder.

• Servo driven.
• Operated via touch screen.
• Available as free standing or inline.
• Can produce:
  - Tickets
  - Cards
  - Car Park Tickets
  - Boarding Passes
  - Thermal tags and labels

• Reel Diameters; standard diameters 40" & 50" or we can manufacture to suit your requirements.
• Loose web feed.
• Loop Control.
• Able to be interphased.
• Hydraulic reel lift on pneumatic air expanding shaft.
• Caster mounted for easy mobility.
• PLC Controlled via ultra sonic sensors.
• nterlocked safety guards.
• Quick release reel hold down clamps.

• One (1) pneumatic brake for reel control on air shaft.
• Pneumatic reel lift for easy loading of reels – Reel Ø 50mm.
• One (1) only variable speed infeed roller for positive tension control.
• Maximum web width: 450mm.
• Two (2) only Flexographic units with pneumatic on/off impression, variable size with reverse doctor blade.
• One (1) turn bar for back printing.
• Two (2) only die cut units complete with drive rollers.
• Two (2) only anvil cylinders with clamp down handles.
• One (1) only large capacity matrix rewind with clutch control.
• One (1) single spindle counter levered rewind shaft 450mm.
• Overload protection on each unit.
• Harmonic registration on all units including last die unit.
• One (1) only crush cut slitting anvil complete with two (2) pneumatic holders and slitting wheels mounted on side lay adjustment.
• One (1) only perf unit with sheet delivery table complete with jogger.
• Long life punching.
• Main drive motor electronic and line drive oversized to accommodate high speed.

• Web width: 330mm.
• Four (4) only Flexographic units with easily removed anilox and ink tank.
• One (1) print cylinder supplied with each unit.
• Units fitted with automatic on/off and press button registration with reverse angle doctor blades.
• Four (4) only U.V. (Ultra-Violet) Curing System.
• One (1) slitting unit with two (2) pneumatic holders. Slitters mounted on dovetail with side lay adjustment.
• One (1) single rewind, reversible for over and under winding.
• Tension controlled via load cell with pot control for varying tensions.
• One (1) 4000mtr matrix rewind with friction clutch control.
• One (1) double die cut, both active for normal die cutting and stripping with matrix rewinder.
• One (1) only counter levered air expanding unwind shaft controlled via electronic brake.
• One (1) plate mounting device for laying printing plates.
• One (1) touch screen control console with label counter, length counter, auto stop and full operational controls.

• Free standing spiral waste rewinder for the removal of film and plastic materials.
• Large capacity spiral wind.
• Can be used independently on any machine.

• Additional power supply (optional).
• Side trimmers.
• Centre slitter.
• Shingling conveyor (optional).
• Drop stacker (optional).